LED Video Wall 20 x 10 Feet with 2 Pillars 4 x 10 Feet (P2.8mm)

Why Choose This Product

• Stage-framing pillars: the two flanking 4x10ft LED pillars turn a single flat screen into a wraparound stage set that draws every eye forward.
• Big, sharp centre wall: a 20x10ft canvas at P2.8mm pitch shows video, logos and live feeds crisply, even from the front rows.
• Fully managed: Rentitem handles delivery, rigging, ground support, power distribution and playback, so you are not left wiring panels yourself.
• One matched system: the same 500mm P2.8 cabinets run across the wall and both pillars, so colour and brightness stay consistent across the whole picture.
• Event-ready power and control: a three-phase distribution board and dedicated video processor keep a wall this size stable through a full programme.

How Can You Use This

1. Stage a concert or launch: run live camera feeds on the main wall and roll branding or ambient visuals down the two pillars.
2. Anchor a conference or awards night: keep speaker slides, names and sponsor logos large and legible across the room.
3. Set a wedding stage: frame the couple with the main wall behind and the pillars flanking each side for a full backdrop.
4. Host an exhibition or product reveal: loop product films and 3D visuals as a tall, immersive centrepiece.
5. Give sponsors real estate: dedicate the side pillars to partner branding while the main wall carries the show.

What's Included

• 1× LED cabinets (500mm x 500mm, pixel pitch P2.8) for the 20x10ft main wall
• 1× LED cabinets (500mm x 500mm, pixel pitch P2.8) for both 4x10ft side pillars
• 1× Processor LED Controller video processor
• 1× Three Phase Power Distribution Board
• 1× Modular stage-deck ground support
• 1× Rigging and cabling
• 1× Plus additional equipment and on-site crew confirmed at booking