Loading…
A passive 3.5mm male to XLR female converter that turns a laptop, phone or media player output into an XLR connector, so it can join a cable run to your mixer or PA. No power needed, and it is tested before every rental.
A compact passive adapter with a 3.5mm (mini-jack) male plug on one end and an XLR 3-pin female socket on the other.
You plug the 3.5mm end into a consumer source, such as a laptop, phone, tablet or media player headphone or line out, and the XLR female end then accepts an XLR male cable that runs onward to a mixer, powered speaker or PA.
It carries a single mono channel, works one way from source to sink, and is shielded to resist interference on the short patch. It needs no power or batteries.
Choose this when you simply need to change the connector so consumer audio can join an XLR run.
If you have a long unbalanced run from a consumer source, or you are fighting hum and ground loops, a DI box does active impedance matching and ground lift and is the better tool for that job.
Feed a 3.5mm source into an XLR cable
