Split your sound cleanly across subs, mids and tops
The dbx 234XL is a professional audio crossover for hire in Colombo.
It takes one full-range signal and splits it into separate frequency bands, then routes each band to the right power amplifier so your subwoofers, mid drivers and high drivers each get only the range they should play.
The dbx 234XL is a signal processor, not a speaker and not an amplifier. It is the piece that sits between your mixer and your power amplifiers in a live PA or DJ rack.
You can configure it as a stereo 2-way or 3-way crossover, or as a mono 4-way crossover, to match how your system is built.
Every input and output is on balanced XLR, it covers a frequency response of 20 Hz to 20 kHz (+/-0.5 dB), and it is a mains-powered, rack-mountable unit weighing about 1.8 kg.
Because it does the band splitting for you, each amplifier and speaker only handles the frequencies it is designed for, which keeps a multi-way system clean and controlled.
In simple terms, it decides which sounds go where: the deep bass to the subwoofer amplifier, the mids to the mid amplifier, and the highs to the top amplifier, all from one full-range input.
That is why it is a standard part of a serious PA or DJ rack rather than something you hear on its own.
Why Choose This Product
- Trusted brand: dbx is a name sound engineers know for signal processing, so it fits straight into a professional PA or DJ rack.
- Flexible modes: run it as a stereo 2-way or 3-way, or a mono 4-way crossover, to match your speakers and amplifiers.
- Clean band splitting: it sends lows to the subwoofers and highs to the tops, so each driver plays only its own range.
- Balanced XLR throughout: XLR inputs and outputs keep the signal clean over the runs inside a rack and stage.
- Rack-ready and light: a compact, rack-mountable unit of about 1.8 kg that is easy to add to an existing setup.
- Rent instead of buy: hire it for the event and hand it back, tested and ready, without owning a unit you only use now and then.
How Can You Use This
- Build a PA system: split the signal to feed separate subwoofer and top amplifiers in a live sound rack.
- Run a DJ sound system: keep the bass tight on the subs while the tops handle vocals and highs.
- Tune a multi-way rig: set crossover points so each speaker plays the range it is built for.
- Protect your drivers: stop low frequencies reaching the tops and high frequencies reaching the subs.
- Cover weddings and events: slot it into a hired PA rack for receptions, functions and stage setups.
What's Included
- 1× dbx 234XL Crossover
- 1× Power Cable
