
A single 15 metre RCA to RCA cable that carries one analogue channel, so you can run a subwoofer feed, mono line audio or composite video across a room or hall.
It is tested before every rental, so it just works on the day.
This is a single RCA (phono) cable, 15 metres long, with one RCA male plug on each end. It carries one analogue channel, which means it is an unbalanced, line-level interconnect rather than a stereo pair.
In practice you use it for one job at a time: sending a subwoofer or LFE feed from an AV receiver or mixer to a powered sub, running a mono line audio signal from a source to a mixer or amplifier, or passing a composite video feed (the yellow line from a DVD player, set-top box or analogue camera) over to a projector, TV or monitor.
Because it is a single line, stereo audio needs two of these leads, one for the left channel and one for the right.
The cable is shielded with gold-plated tips, which helps hold off hum and interference across the 15 metre run and keeps the contact clean through repeated plug and unplug cycles.
It is passive and needs no power, and it works in either direction between any two RCA-equipped devices.
The 15 metre length is built for real distance, so the source and the destination can sit well apart, such as a mixer at the back of a hall and a sub or projector near the stage.
Being an unbalanced analogue line, a very long run can add some noise, so for a long balanced stage feed a balanced XLR cable is the better choice, which we also rent.